md3000i Degraded Physical Disk Channel

Hi,

I have an md3000i with attached md1000.  We had a HDD fail which the hot spare took over with no down time or issues.

Now I replaced the failed drive and it was put back into the array.  Once that completed now I'm showing Degraded Physical Disk Channel on channel 0,1 (I'm assuming that's the LUN number since LUNs 0 and 1 are part of the RAID group with the failed disk).

Also it seems to have created a Virtual Disk Not On Preferred Path issue.  This md3000i has dual controllers and the ESX hosts are all multipathed but not sure why all of this is coming around after replacing a failed disk.

Thanks,
Josh.