Hi,
We have poweredge R910 that is configured with 4 drive in RAID 5 and 2 drives in RAID 1 and othere 2 Drives Also in RAID 1.
Now when I check the Manament server I can see that one of the disk of one of the RAID 1 is showing Degraded and I can see that one of the disks has red X so we have to replace this drive.
if I understand it correctly we must replace the drive with exact the same drive.
Question:
the current drive has order numer of 400-22925 we can not find with the same order numer any drive so I did search the Dell website and find the same drive but has the order numer 400-22931
can we use this drive to replace the defect one? also I think the only thing we must do is without shuting down the server just remove the defect drive and replace it with new one is this also correct?
defect drive:
Physical Disks
ID | 0:0:6 |
Status | Critical |
Name | Physical Disk 0:0:6 |
State | Failed |
Bus Protocol | SAS |
Media | HDD |
Revision | DE09 |
T10 PI Capable | No |
Certified | Yes |
Capacity | 837.75GB |
Used RAID Disk Space | 837.75GB |
Available RAID Disk Space | 0.00GB |
Hot Spare | No |
Vendor ID | DELL(tm) |
Product ID | AL13SEB900 |
Serial No. | 54U0A0RHFRD2 |
Part Number | PH0RC34W7557145V8F73A03 |
Negotiated Speed | 6.00 Gbps |
Capable Speed | 6.00 Gbps |
Sector Size | 512B |
Manufacture Day | 07 |
Manufacture Week | 22 |
Manufacture Year | 2014 |
SAS Address | 500003958840DE4A |