MD1000 slows way down on large file transfers
We have two MD1000 SAS storage arrays hooked up to a Dell R710 server. During a large file transfer (40+ GB) to one of the MD1000 arrays it will slow way down to a crawl. It looks as if it is slowing...
View ArticleNeed Win 7 Driver for PERC 9 h330 Mini
I need to install Win 7 64 on a Precision Rack 7910 workstation. The installation disk for SP1 doesn't have a driver for the RAID controller. The download from the 7910 support page is an exe file...
View ArticleDegraded Hard drive
Hi,We have poweredge R910 that is configured with 4 drive in RAID 5 and 2 drives in RAID 1 and othere 2 Drives Also in RAID 1.Now when I check the Manament server I can see that one of the disk of one...
View ArticleH310 Mini MessageID: STOR0210, Message: SCSI sense data (Sense key: B Sense...
R720xd with Perc H310 Mini.18 Drives16 of the drives are unraided.2 drives are Raid1 (they are the last two drives on the bus bays 16 and 17)O/S is Red Hat 6.7OMSA has started populating the messages...
View ArticleClik here to view.
Dell SC 2020 - Failed to re-balance ports
Hi ALLI have some problembutI can not find the cause of the problem!!zoning set
View ArticleNX4 Error
Hi All,following to power problems, our servers do not have access to the most NX4 storage.Checking by SSH (on Control Station), by running the command nas_checkup i get this...
View ArticleRaid Tiering?
Dear All,how does RAID Tiering work, especially in SC 2000 series? Is data moved between different RAID levels? Is it really physically moved or is there any abstraction layer? Is there any other name...
View ArticleAdd Disk Array to R620 with MD1200
I have a R620 server running Redhat Enterprise 6.4 connecting a MD1200 disk array with a H800 cardthe disk usage on the MD1200 disk array will be full soon. Can we add another MD1200 disk array to...
View ArticleEMC CX4-120, failed disk
Hi,I would replace a failed disk on my EMC Storage CX4-120It's out of warrenty, service tag <ADMIN NOTE: Service tag removed per privacy policy>How can we proceed?ThanksClaudio
View ArticleMD3000i Degraded wide port becomes failed
Hi,We have an out of warranty MD3000i that has been running fine for years, but has recently begun throwing event code 1707, 1706 and 4011 errors every few months, and leaving us with Virtual Disk Not...
View ArticlePowerVault Logs report failed RAID Module - but all appears well.
Recieved an e-mail from our PowerVault MD3220i yesterday showing the following message: Host ID: Out-of-BandEvent Error Code: 1710Event occurred: Mar 15, 2016 2:54:45 PMEvent Message: RAID Controller...
View ArticleManual for eLatitude e6410 with ssd drive
Hello all. I found a manual that I needed a couple month ago. I lost the url or the download that I did. Now I am wondering if anyone knows where I can download this manual again. It had pictures...
View ArticleWin 10 not recognizing 3 tb hard drive on OptiPlex 7010 intel rapid storage...
Win 10 not recognizing 3 tb hard drive on OptiPlex 7010 intel rapid storage utility does ??
View ArticleInstalling Windows 7 64Bit on new SSD
Hey Guys,i'm just getting a headdache. Windows installation doesn't find the installed ssd. I created a new VD in the PERC H310 menu and everything looks fine but windows setup doesn't see the device....
View ArticleRe-install MDSM for MD300
I have an MD3000 connected to a PE2950 running Unix, and the PC that had the MDSM was removed from the network and disposed of (without my knowledge...). Can I install the MDSM on a new PC (windows XP...
View ArticleNX3230 Storage mirror
HI Everyone, First of all well done, what a great forum. I currently have a system with 2 x PowerEdge R630 and 2 x NX3230 NAS servers, running windows server 2012 R2 and windows storage server...
View ArticleStorage on the C2665dnf printer
I want to dispose of my C2665dnf printer and need to know if it has storage on it that I need to worry about.
View ArticleRe: Unable to back up on Drive E
O/S MS Windows 7 C Drive 250 GBE Drive 1 TBF Drive 75 GBHi GuysI was wondering if you could help me before I head down to the local Dell service centre I use a 17 inch Alien all has been going well up...
View ArticleDR4100 set up SNMP
Greetings community,Please could someone point me in the right direction in terms of setting up SNMP on a DR4100. I downloaded the Administrators Guide and searched for SNMP in the doc, and it didnt...
View Articlemd3000i Degraded Physical Disk Channel
Hi,I have an md3000i with attached md1000. We had a HDD fail which the hot spare took over with no down time or issues.Now I replaced the failed drive and it was put back into the array. Once that...
View Article