MD3600i Hot spare parameters.
Morningwe have a Dell MD 3600i SAN attached to which are attached 2 MD1220s.The MD3600i is the 12 slot version with 1TB Nearline drives 6Gbps @ 7200 RPM ( Constellation ES )Both the MD1220s are the 24...
View ArticleCan I use OMSA to monitor MD1200 attached to a Cisco UCS C-Series server?
Hi,Anyone know if i can use OMSA to configure hardware monitoring of MD1200 on a Windows Server 2012 RTM installed on a Cisco UCS C-Series server?Thanks in advance,Gerald
View ArticleDell SAN Storage
Hi, Can anyone suggest me for choosing best SAN storage for below requirement.2 Controllersaccelerated RAID 6 Enabledand 12 TB Usable storageMy Project cost is 2.50 Lakhs INR
View ArticleML6000 and AX4.5 SAN
Hi,I have a ML6000 that is on an AX-4.5 SAN and I'm having trouble getting the Backup Exec server to see it. I can ping the ML from the server but neither the 'unknown media changer' or either of the...
View ArticleMonitor MD3600 array in SCOM 2012
I am trying to configure MD3600 storage array to be monitored in SCOM 2012 R2. I imported MD Storage Array Management Pack Suite Version 6.0 and read the admin guide for it. MD3600 appears in SCOM now...
View ArticleInstalling Windows 7 64Bit on new SSD
Hey Guys,i'm just getting a headdache. Windows installation doesn't find the installed ssd. I created a new VD in the PERC H310 menu and everything looks fine but windows setup doesn't see the device....
View ArticleSANHQ 3.1 reporting 100% usage on NAS volumes
Since upgrading to 3.1, SANHQ has been alerting for Critical In-use space on 2 volumes. There are 6 NAS volumes on that group and there's enough space for the NAS. I believe the data distribution on...
View Articlehow to rebuilt a raid 1 on dell Precision 7610 after a disk failure
Hi guys, first sorry for my englishI'm tryng to learn how to manage raid volume. At work we have a Precision T7610 with a RAID 1 Hardware.One of the two HDD was broken we removed and we have to...
View ArticleMD3200 power supply failures
Hello, we got some failures with MD3200 PSU (50 units), the power supply units stop to working while start-up or if we get power failure the PSU are unable to start working, after analyzing the issues...
View ArticlePowerVault 114X LTO4 drive - frequent problem inserting tape
Our customer is having an intermittent problem with their PowerVault 114X LTO4 drive. It's a standalone drive, not a changer. The unit just turned 3 years old last month, and has been out of warranty...
View ArticleReconstruction after Syswipe...
hello,Is there any possibility to restore or reconstruct array configuration after using syswipe on MD3000i?thanks I.
View Articlemd3000i Degraded Physical Disk Channel
Hi,I have an md3000i with attached md1000. We had a HDD fail which the hot spare took over with no down time or issues.Now I replaced the failed drive and it was put back into the array. Once that...
View Articlemd3000i + md1000 + 15x450Gb 15kSAS = Poor Performance
Morning,We recently acquired a used md3000i with an md1000 added shelf. The 3000i has 15x450Gb 15k SAS (in one RAID6 LUN) Dell drives. The 1000 has 15x 1Tb 7200rpm (in 2 RAID 6 LUNs).I have this...
View ArticlePower Supply / Cooling Fan issue
Hello there,I have problem in our PowerEdge MD36000f which is the left fan (Slot 1) has problem in the power supply. I called the service support this morning and the quality of the connection wasn't...
View ArticleDell CX4-120 Fault SPS and Failed/Removed status
Hello,I have a Dell CX4-120 reporting some faults.1\Disk array Enclosure Bus 0 Enclosure 1 is faulted2\Disk Processor Enclosure SPE is faulted3\Standby Power Supply SPE SPS B is faulted (I have checked...
View ArticleLUNs unknown group won't come online / rebuild Dell CX4-120
Hello,I have a dell emc cx4-120 2 enclosures Raid 6I have disk failed replaced and Show rebuild 0% I have found that if I put the failed disks back in they show as removed but rebuild 100%I can replace...
View ArticleDell EMC CX4-120 reset disk command?
Hello,I have disks reporting as removed i need the command or process on how to clear the removed flagtrying to restore the LUNs and disk arraryThanks Danny
View ArticlePlacing MD3220 controller on-line
A SAS controller was replaced on an MD3220. The controller now shows as being in service mode and the recovery guru walks through the steps to bring it on-line, the main step being go to...
View ArticleDell PowerVault 124T
Hi, i am new in dell world and i have a concern regarding powervault 124t tape loader. My Robotic library is DELL PV-124 T and my Tape Drive is IBM Ultrium-HH4. i have a backup solution called backup...
View ArticleMD3820i MPIO
I am running a MD3820i (storage) with 2 controllers. I have 4 nodes (server 2012 r2) configured and connected to the storage however it seems that only one path is being used.I read in a post that this...
View Article