Monitoring Dell MD Storage (1000 and 3000),
We have 3 Dell MD Storage (1000 and 3000), is there possibility of Monitoring these storage hardware, These are directly attached to servers, No IP to it.Can Dell MD Storage can report to a central...
View ArticlePowervault 114x error code C
Morning,we have a powervault 114x that we use for backing up data, currently when i try to do a back up im getting an error code C on the tape drive. can anyone plse assist what the error means and how...
View ArticleMD-3000
Is the MD-3000, compatible with Windows server 2012?Currently its running firmware 06.70.17.60
View Articleabout Dell N4C2D 62111C1 LSI/SAS2X36 expander
hi everyonei have a dell LSI/SAS2X36 expander (see the picture i attached). i don't know how to connect power cable to the SAS expander. should i use cpu 4 pin cable to supply power?if anyone knows how...
View Articlehi everyone
hi everyonei have a dell LSI/SAS2X36 expander (see the picture i attached). i don't know how to connect power cable to the SAS expander. should i use cpu 4 pin cable to supply power?if anyone knows how...
View ArticlePERC H310 and Disk 4Kn
Hello,The PERC H310 has HD limitation 2TB (or more) 4kN?Thank you.Server Configuration: Dell T320 with PERC H310New Disk: HGST HUS726020ALN610Capacity: 2TBPerc H310 PD MGMT recognized capacity:...
View ArticleAUTOMATIC SCHEDULED BACKUP does not work (3.1)
Hello,I've set up the backup / restore settings and manual backup works perfectly. But automatic backup produces nothing. Set as enabled, AUTOMATIC SCHEDULED BACKUPEditInformationModify the backup...
View ArticleIP of SAS/iSCSI bridge
I have aquired a used SAS/iSCSI bridge. I have reset the TL2000 that it is installed in to factory config via the front panel. The bridge is not pingable on its default IP (10.10.10.10) nor any IP on...
View ArticleProblem with H700 Perc Raid Array under SBS2011
Hello after having changed a HDD due to E1810 Error the new HDD shows capacity 0GB in the OpenManage ... how to proceed ?Best regards
View ArticleStrange slit
DR4100 with 10 1Tb drives. Used the bios of the R610 to build a Raid 6 with one hot swap drive. Open in Dell OpenManage server Administration and the configuration was there and correct at 6+ Tb....
View ArticlePassword reset, TL2000 SAS/iSCSI bridge
I have a Dell TL2000 with a SAS/iSCSI bridge module installed. Please send me a reset password by email. The challenge code is:MYPGJD9G81S.Thank youBTW, sorry for duplicate post: I have created this...
View ArticleFirmware update for out-of-warranty ns-120
Remember way back when Dell was selling EMC storage? Well, at the time, we bought an AX-4 and an NS-120 for 2 different sites. The NS-120 went largely unused for several years, as it had been installed...
View ArticleErrors on ML6000
Hey, everyone. I am using a ML6000 that had a bunch of errors. Now, I'm only down to a couple, and I'm somewhat stuck. I replaced both tape drives and all the tapes. I still get these errors T033...
View Articleraid controller down can i mange the server
can i great virtual disk with one raid controller because the second one is down.Error 1011 A management connection to the RAID controller module in slot1 must be defined to complete this operation
View ArticleMD3200 - SAS Port(s) Fail After Firmware Update
WOW! I updated the firmware on the MD3200 to latest 08.20.18.60 and everything appeared to go well. Now one controller is not visible in MSDM and I get a "needs attention" message indicating the SAS...
View ArticleDell PowerVault 3200i "Out of Band" Message
In the Devices i see the array that i have create but when i want ot start the Array Management Windows it appears the message: Unable to communicate with storage array. Possible causes: 1. The storage...
View ArticleMD3600i Hot spare parameters.
Morningwe have a Dell MD 3600i SAN attached to which are attached 2 MD1220s.The MD3600i is the 12 slot version with 1TB Nearline drives 6Gbps @ 7200 RPM ( Constellation ES )Both the MD1220s are the 24...
View ArticleCan I use OMSA to monitor MD1200 attached to a Cisco UCS C-Series server?
Hi,Anyone know if i can use OMSA to configure hardware monitoring of MD1200 on a Windows Server 2012 RTM installed on a Cisco UCS C-Series server?Thanks in advance,Gerald
View ArticleDell SAN Storage
Hi, Can anyone suggest me for choosing best SAN storage for below requirement.2 Controllersaccelerated RAID 6 Enabledand 12 TB Usable storageMy Project cost is 2.50 Lakhs INR
View ArticleML6000 and AX4.5 SAN
Hi,I have a ML6000 that is on an AX-4.5 SAN and I'm having trouble getting the Backup Exec server to see it. I can ping the ML from the server but neither the 'unknown media changer' or either of the...
View Article