Default User Name and Password of DELL EQUALLOGIC PS6100
Dear Everyone,Could you help me to share the default Username and Password? I really need it urgent please help to provide me asap. Best regards,Kakada chheng
View ArticleAssembly PERC5I SAS Card WX072 maximum storage capacity
I have a PERC5I SAS Card WX072 and I need to know the maximum capacity. Â Example is I want to have 5x2tb drives, can I do that? How many hdd's can I have at what capacity
View ArticleFirmware update for out-of-warranty ns-120
Remember way back when Dell was selling EMC storage? Well, at the time, we bought an AX-4 and an NS-120 for 2 different sites. The NS-120 went largely unused for several years, as it had been installed...
View ArticleDELL MD1220 (1.01)
Hi all! Will you please tell me full list of physical discs that can be used with this model? I didn't find the actual list by myself.
View ArticleDELL MD1220 (1.01) and HUC156060CSS204
Hi all! I've added 2 HGST drives (HUC156060CSS204) to my MD1220 (that is connected to MD3600f+1200) - MDSM shows "Status: Incompatible" and "Mode incompatible". I'm trying to update firmware from CD02...
View ArticleDell Nautilus
Hi all! Please tell me link where I can get the latest Dell Nautilus Firmware Update UtilityÂ
View ArticleDell PowerVault MD3400 warning massege: "controller is locked down due to...
Hello dear friends! I have Dell PowerVault MD3400 with two controllers. One of them has a mistake.MDSM doesn't see it, though one of controllers gets ip adress from DHCP server.I need your ideas and...
View ArticlePower Vault TL4000
The number of drives reported for this library is different from the number of drives detected by DPM. If any drives are out of the library for servicing, ignore this alert; otherwise, remap the drives...
View ArticleVirtual Disk array configuration lost after a reboot
Hi,I have the biggest issue right now. I have a PowerEdge Sever with 3 MD1200 direct attached storage. The MD1200 are connected via H800 Perc controller.I remotely rebooted the server this morning and...
View ArticleDELL Power vault_MD3420 - Virtual disk not on preferred path error.
Hello Friends,             We have DELL MD3420 Power vault device with 2 SSD and 4 HDD. We've got an error message saying " Virtual disk not on preferred path". Can anyone please explain...
View ArticleDownload was interrupted
I've tried all afternoon to download MD3420 resource DVD from Dell website. Is there any reason for such a poor download quality today?
View ArticleConfigure Alert on MD3220i
Hi there, I'm really in on pressure to configure Alert on MD3220i, please help me so I'm in rush. what I did so far:I setup virtual mail server (include gmail account, it works fine I can send out test...
View ArticleDegraded Virtual Disk message shown on md1200
Hi,I noticed a message this weekend stating a 'Predictive Drive Failure' on my md1200. I decided to be proactive and replace the drive, however now I have a 'Degraded Virtual Disk' message.When...
View ArticleI want to look up an EMC serial number
I'm trying to determine the actual age of a device. Where do I go?ThanksWJO
View ArticleMD1000 Replaced Drive into separate controller
We have a customer with a 25TB R5 array (I know its bad, don't ask, inherited) on an MD1000, drive 14 went out, we replaced with exact brand and model, firmware is very close. Most are 0001, and there...
View ArticleExpanding a PV MD3600F+MD1200 with a MD1220
Hi all!We are in a process of expanding our MD3600f SAN and I have a few questions about this expansion i hope someone can clarify a bit for me.Todays setup are one MD3600f + MD1200 running with...
View ArticlevSAN/Dell Support Question
Hi AllI am currently in the process of putting together a spec for a 3-node vSAN. I have a couple of questions regarding Dell support for the hardware.I have a spare R730XD in stock from a previous...
View ArticleStorage MD3200i one controller not booting, can't access
HiI have 2 controllers, 1 works with access to the <CTRL> <BRK> interface since the other one stopped after an attempt to update the firmware by my client (I think he tried to update).When...
View Article